Product Description +
Product Specifications:
- Resin Type: Single-part polyurethane acrylic, hard-type setting.
- Net Weight: 100 grams per bottle.
- Container Form Factor: Opaque black squeeze bottle with a fine-tipped applicator nozzle.
- Curing Source: UV curing lamp (36W or higher recommended) or direct sunlight.
- Viscosity Finish: Smooth-flowing liquid consistency optimized for doming and small molds.
Care Instructions:
- Storage: Always store the bottle upright in a cool, dry place completely away from windows or direct sunlight. Ensure the black nozzle cap is twisted tightly shut after every use to prevent ambient UV rays from thickening or curing the resin inside the bottle.
- Safety Handling: Work in a well-ventilated area when working with liquid resin. Avoid direct skin or eye contact by wearing protective craft gloves, and review the safety warnings displayed on the lower section of the bottle label pictured in image_9017a6.png.
- Bubble Removal: To achieve a flawless, bubble-free finish, let the poured resin sit in your mold for a minute to allow micro-bubbles to rise to the surface, then gently pass a lighter flame or heat gun quickly over the top before curing.
Product Specifications:
- Resin Type: Single-part polyurethane acrylic, hard-type setting.
- Net Weight: 100 grams per bottle.
- Container Form Factor: Opaque black squeeze bottle with a fine-tipped applicator nozzle.
- Curing Source: UV curing lamp (36W or higher recommended) or direct sunlight.
- Viscosity Finish: Smooth-flowing liquid consistency optimized for doming and small molds.
Care Instructions:
- Storage: Always store the bottle upright in a cool, dry place completely away from windows or direct sunlight. Ensure the black nozzle cap is twisted tightly shut after every use to prevent ambient UV rays from thickening or curing the resin inside the bottle.
- Safety Handling: Work in a well-ventilated area when working with liquid resin. Avoid direct skin or eye contact by wearing protective craft gloves, and review the safety warnings displayed on the lower section of the bottle label pictured in image_9017a6.png.
- Bubble Removal: To achieve a flawless, bubble-free finish, let the poured resin sit in your mold for a minute to allow micro-bubbles to rise to the surface, then gently pass a lighter flame or heat gun quickly over the top before curing.
Professional Crafting Results with The Tree Shop Guam
Take your DIY projects to the next level with Kisrel UV Resin. This 100g hard-type resin is a must-have for local makers who need a reliable, high-performance finish without the long wait times of traditional epoxy.
Whether you're doming charms or casting intricate jewelry, Kisrel provides a professional, glass-like finish every time.
Frequently Asked Questions
What is the difference between this UV resin and standard epoxy resin?
Traditional epoxy resin requires mixing a separate resin and hardener together, taking 24 to 48 hours to fully cure. Kisrel UV Resin is a single-part formula that requires absolutely no mixing or measuring! It stays liquid until it is exposed to a UV light source, curing solid in just a few minutes.
Do I need a special lamp to cure this resin, or can it dry on its own?
Because this is a UV-activated formula, it will not air-dry on its own. It requires a UV crafting lamp (a 36W lamp or higher is highly recommended) or exposure to direct outdoor sunlight to trigger the curing process and turn the liquid into a hard solid.
How long does it take for the resin to cure completely?
Under a standard 36W UV lamp, small charms or domed surfaces typically cure hard in 2 to 4 minutes. If you are curing your projects using direct outdoor sunlight, it can take anywhere from 5 to 15 minutes depending on the intensity of the sun.
Is this resin the 'hard' type or the 'soft/flexible' type?
This is the premium hard-type resin formulation. Once it is completely cured under a UV light source, it sets into a highly rigid, tough, solid, and scratch-resistant finish that feels like smooth glass.
